• info@labexpo.biz
  • Sample Concentrator DSC-A101

Sample Concentrator DSC-A101

Nitrogen concentrator instrument can concentrate dozens of samples simultaneously, saving time and high efficient, instead of rotary evaporation instrument.
Temp. control range : RT +5˚C~150˚C
Temp. setting range : 5˚C~150˚C
Temp. stability @40~100˚C : ≤±0.5˚C
Temp. stability @100~150˚C : ≤±0.1˚C
Block temp. uniformity@100˚C : ≤±0.5˚C
Block temp. uniformity@150˚C : ≤±0.1˚C
Temp. display accuracy : 0.1˚C
Heating speed : ≤30min (40˚C to 150˚C)
Time range : 1min~99h 59min or continuous
Needle plate max. lift stroke : 285mm
Gas-in joint outer diameter : Φ7mm
Nitrogen pressure : ≤0.1MPa
Nitrogen flow rate : 0~10L/min
Needle length : 150mm
Sample capacity : 2 standard blocks
Net weight : 6.1kg
Dimensions : 200×260×525mm
Fuse : 250V, 3A/6A, ϕ5×20
Power : 400W
Power supply : AC 220V / AC 110V, 50/60Hz
  • The position of gas needle in air chamber plate can be adjusted to suit for different types of tubes
  • The height of the air chamber plate can be adjusted The length of a standard gas needle is 150mm
  • Gas needle is controlled independently Separately blow of each needle and flow regulating of each needle are available to avoid gas waste
  • The entire equipment can be put into ventilation cabinet when the concentration sample in toxic solvents
  • Built-in overheat protection automatic fault detection and fault beep alarm devices
  • LED display immediate temperature and diminishing time Operation is simple and convenient Uncertain time can be set for continuous operation
  • Synchronously working with heating by dry bath in the bottom and nitrogen blowing on the surface accelerates liquid evaporation and sample concentration
  • Standard configured air cavity and adjustable bracket
Nitrogen concentrator is mainly used for enrichment of large-volume sample or preparation (such as drug screening, hormone analysis, liquid phase, and mass spectroscopy in the analysis of sample preparation)

Request Quote